Part of the HTL Group

EvoTorque 2

X

Hire this Product

Fields marked with an * are required
X

Buy this Product

Fields marked with an * are required
X

Callback Request

Fields marked with an * are required

Product Description

The unique ‘intelligent joint sensing’ technology continuously measures the joint during tightening and, when necessary, employs dynamic braking to avoid torque over-shoot due to motor inertia.

EvoTorque® can apply torque accurately over a wide range of joint rates from hard (high torque rate) through to soft (low torque rate). All EvoTorque® tools are highly tolerant of supply voltage and frequency variation.

The EvoTorque® 2 has the ability to memorise multiple targets, work IDs, user IDs and readings. The tool has three modes of operation: Torque, Torque and Angle and Torque Audit.

The unique Audit Mode is a sophisticated feature for testing pre-tightened bolts with minimal impact on the original fastening torque and can provide quality control data for monitoring joint performance over time.

 


Features & Benefits

  • Operating range from 100 Nm – 6000 Nm
  • Versions for 110V or 230V
  • Factory calibrated to ± 3%
  • USB and Bluetooth® 4.0 data transfer
  • 3000 reading memory, time and date stamped
  • Complementary PC software ‘EvoLog’ for data management and tool configuration
  • Very low vibration levels using a non-impacting mechanism; this leads to comfortable and safe use with less damage to the tool, socket and threaded assembly
  • Reaction forces are contained by the reaction bar, so forces are not passed back to the operator
  • Several reaction bar styles available, including versions for restricted applications.
  • Engineered to order reaction accessories are also available.
  • Correct torque output from hard through to soft joints
  • Indicator on the tool clearly signals that the correct Torque or Angle has been achieved
  • Operating range from 100 Nm – 6000 Nm
  • Versions for 110V or 230V
  • Factory calibrated to ± 3%
  • USB and Bluetooth® 4.0 data transfer
  • 3000 reading memory, time and date stamped
  • Complementary PC software ‘EvoLog’ for data management and tool configuration
  • Very low vibration levels using a non-impacting mechanism; this leads to comfortable and safe use with less damage to the tool, socket and threaded assembly
  • Reaction forces are contained by the reaction bar, so forces are not passed back to the operator
  • Several reaction bar styles available, including versions for restricted applications.
  • Engineered to order reaction accessories are also available.
  • Correct torque output from hard through to soft joints
  • Indicator on the tool clearly signals that the correct Torque or Angle has been achieved

© Hire Torque and HTL® are registered Trademarks of Hire Torque Ltd 2015

Part of the HTL Group

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close