The HTL Calibration Service Van!
Introducing the HTL Calibration Service Van, The UK's 1st mobile service and calibration solution for all your torque tooling. Direct to your site...
Our fully equipped onsite Calibration and Service Van can calibrate any make or model of Torque Wrench and is available to come direct to at your convenience.
For more information or to book a visit ‘Click’ here to visit htlvan.co.uk.
The HTL Team doing their bit for Wear it Pink Day!
Wear it Pink Day is Breast Cancer Campaign's biggest fundraising event and the HTL Team thought it would be a worthy cause to dress up in Pink for the day. The idea is for Everyone to wear something pink for the day and makes a donation to the Breast Cancer Campaign!
Thank you to all the generous people that have donated so far and for anyone that hasn’t, we are still taking donations!!
We are proud to announce our Asia Pacific Facility is Officially Open!
The Asia Pacific Facility stocks a huge amount of both topside and subsea controlled bolting equipment, available for both sale and rental.
Our Asia Pacific Team have adopted the HTL ethic of striving to supply the service and support 2nd to none!
Please click here to see Pictures from the Open day along with further pictures of the Facility.
Check out our brand new Bespoke Design Section
As part of our complete service, we offer an in-house design facility where we are able to design bespoke engineered products and solutions for a variety of applications and industries.
Our in-house Engineering Design Team can give comprehensive range of solutions to suit your requirements, whether providing full product development, additional resource during the design and development cycle or provide expertise in areas that you need to solve your problems.
click here for recent projects undertaken
HTL Iraq
HTL are proud to announce that we have teamed up with
‘PESECo Petroleum Equipment Supply Engineering Company
Ltd’, to become our official Partner for hire and sale of our range
of torque equipment in Iraq.
With ‘in-country’ facilities based in Kurdistan and holding an
extensive stock of Hand and Hydraulic Torque Equipment readily
available to service Iraq, making ‘PESECo’ the number one choice for any Bolting Requirements!
For further information please contact us.
Tel: (+44) 01670365883 or Email: [email protected]
HTL has now been awarded the accreditation of the ISO 14001 Standard!!
ISO14001 is an international standard for environmental management systems. This certification proves that HTL is aware of the impact it has on the environment and is working to reduce it. From strategies to reduce energy consumption to appropriately managing the way HTL disposes of waste.
The ISO 14001 certification shows HTL’s commitment to the environment, ensuring that we are consistently meeting environmental criteria and regulations by demonstrating our commitment by reducing harmful effects on the environment.
We would like to take this opportunity to thank the whole team at HTL for their help and support throughout the application, and ask everyone to apply the same efforts as we continue to reduce our environmental impact.
HTL Asia Pacific Official Opening
We are pleased to inform that HTL has recently strengthened its physical presence as a global leader by opening new premises in South-east Asia. As from 1st August 2012, P.T. HTL Asia Pacific was formed, its new office building located in the buzzing industrial district of South Jakarta and is headed by Regional Director, Gary Milnes.
P.T. HTL Asia Pacific will be working closely with its UK principal in promoting HTL as the dynamic leading global company in controlled bolting. Work is already on-going in identifying new markets, establishing relationships with major players in the area and securing new customers.
The Free HTL app is here!
The newest essential tool has arrived; the HTL mobile app.
It's been designed to answer all your torque related queries in a
quick and effective way meaning you can get on with the job with
no fuss. It offers the following easy-to-use features:
- Flange Bolting Patterns
- Torque Figure Calculation
- Measurement Conversion Facility
The HTL mobile app is available on the AppStore, GooglePlay,
or right here on the website.
HTL are an ECITB Mechanical Joint Integrity Accredited Training Centre
At HTL, while working through our Training Division ‘Gastech’, we can offer a series of ECITB endorsed certificates in specialist bolting skills and techniques. These short courses teach the critical skill and technical training required;
- MJI10 Hand Torque Bolted Connection Techniques
- MJI18 Hydraulically Tensioned Bolted Connection Techniques
- MJI19 Hydraulically Torqued Bolted Connection Techniques
With dedicated class rooms and training areas in Northumberland and our Aberdeen Facility, we are fully operational to cover any aspect of your bolting requirements. Through ‘Gastech’ we understand that it is not always convenient for your personnel to work off site, therefore why don’t we come direct to you? We have a fully mobile training rig fully fitted out and ECTIB Approved.
New Bespoke Pump Unit Section added
We can offer a range of flexible engineering solutions to solve almost any hydraulic problem and because our engineers have specific experience designing pumps we are able to take your projects on board at any stage, from the start of a feasibility study right through to the final commission of your hydraulic pump.
‘Click here to view our recent Projects’
The Automatic Torque Pump
New developed by HTL the Auto-Pump offers a fully automated operation allowing the operator to pre-set the pressure then activate the pump to work continuously. Operating hands free until the pump reaches the pre-set pressure. This ensures less operator fatigue, quicker tightening as well as ensure consistency bolt for bolt reliability.
All our Torque Pumps come complete with four port manifold allowing the simultaneous use of up to four torque wrenches, saving tme, fatigue and money.
Check out our brand new Subsea Section
HTL have one of the largest rental fleets for Subsea equipment in Europe of the most advanced controlled bolting equipment available, including Subsea Hydraulic Torque Equipment, Subsea Tensioners, Pump Units, Subsea Nut Splitters, Diver Controls, Hose Reels and many other items.
For all your Subsea Tooling requirements, why not check out
our newly developed dedicated Subsea Section.
Click Here For Our Subsea Section
CONGRATULATIONS TO WEST DENTON JUNIORS!!!
We are proud to announce West Denton Juniors have just won the Pin Point Recruitment Junior Football League 3!
They were unbeaten the whole way through and won by a massive 6 points. On winning the title their manager ‘Paul Hartley’ it was down to a huge amount of team work and effort, with a great deal of emphasis on their style of play in one touch passing! ‘Paul’ also made a special mention of one of their strikers, ‘Antoni Spencer’, whom scored 4 hat tricks in the season!
Same again for next year!
New HTL Conversion Calculator!
We had some clever mathematician (geek) develop the following conversion tool to help the rest of us who are too busy to work these things out.
To use the calculator, simply click here and select the type of conversion you would like to perform. So whether you want to convert Nm to lbs.ft, BAR to PSI or just CM to Inches this is the tool for you!
HTL are now proud sponsors of West Denton Juniors Football Club.
After coaches ‘Paul Hartley’ and ‘Alan Carr’ were awarded coaches of the season for 2010, having rebuilt the team from the brinks of folding after only 3 players were registered, are now currently celebrating their 30th year with a strong squad of up to 17 registered players!!
The league is ran by pin point recruitment for the F.A. and are currently sitting top in the second half, 3 points ahead with 2 games to go and a game in hand!
West Denton have reached the final of a Tournament in Warwick Bridge for the last 2 years running only to be beat on penalties, and are playing again later this season, so fingers crossed 3rd time lucky!!!
Good Luck to West Denton Juniors!!!
Congratulations Scott!
HTL would like to say a big congratulations to ‘Scott Collins’ on passing his apprenticeship!
Scott started with the company back in June 2009 as an Apprentice Service Engineer and started his training straight away beginning with NVQ level 2. Covering a total of 6 modules such as working safely in an engineering environment, assembling and testing fluid power systems.
After achieving a level 2 NVQ in ‘Engineering practices’ ‘Scott’ then moved on to the NVQ level 3, becoming qualified in the roles of “carrying out fault diagnosis on fluid power” and “maintain fluid power in engineering maintenance (Fluid power).
As well as completing the NVQ’s, ‘Scott’ has been hard at work over the last 2 years studying for a BTEC in Mechanical Engineering. The BTEC covered subjects such as Maths, Health and Safety, CNC, Mechanical Principles, properties and applications of engineering materials, Engineering Drawing, Business, Engineering, Hydraulics and Pneumatics, and various Projects.
Although these qualifications have been gained, this is not stopping ‘Scott’ from learning further, by going for an HNC in Mechanical Engineering!!!
After congratulating ‘Scott’, ‘He would like to take this opportunity to thank everyone at HTL for their help and support throughout his apprenticeship’.
Good luck with the HNC ‘Scott’……
Aberdeen Branch has moved!
Our Aberdeen Branch is now operating from their new 6000 sq/ft facility at: Unit 4a Wellheads Way, Dyce Industrial Park, Dyce, Aberdeen, AB21 7GD.
With our continual investment, growth and dedication to a flawless customer service, we have expanded further to incorporate:
- A Dedicated Training facility for both classroom and
practical use - Increased our range of stocked products for both Rental
and Sale - Calibration Facilities up to 25,000lbs.ft for all brands of
Torque Tooling - Increased staffing levels for both the Aberdeen facililty and also our dynamic sales team
JAG - Hydraulic Cutting Equipment
HTL are now exclusive distributors of JAG Hydraulic Cutting Equipment, which has been designed and manufactured to excel in Safety, Quality, Durability and Ease of Use to ensure total customer satisfaction.The Hydraulic Cutting Equipment has a proven track record within the following industries:
- Manufacturing / Mining / Construction and Demolition/ Recycling.
- Offshore Oil and Gas Production, Exploration and Decommissioning.
- Sub-sea Engineering Exploration and Decommissioning.
- Nuclear Power Generation and Decommissioning.
Enquire about this product
Electric Torque Tooling
Electric Continuous Rotation Torque Tool
- Faster Free Speed - Up to four times faster than the competition.
- Accurate built-in transducer ensures that torque values are accurate versus interpretations or "guestimates".
- Closed Loop Torque Control System.
- Interchangable Tools, Cables and Controllers - Calibrations are specific to the tool not the system as a whole.
HT-Series 110V & 240V Controller
- Data Storage - Up to 2,040 rundowns stored on board.
- Firmware - Custom-designed operating system means no licensing fees.
- Parameter Set Select and Indication - Change between eight jobs with one touch.
- Tool Calibration Routines - Stores the calibration directly in the tool's memory for easy plug and play into any HT Series Controller.
Enquire about this product
‘Investors in People’ awarded
Investors In People is all about our commitment to our staff and the crucial ongoing role they play on a daily basis within our business. In challenging times we feel having a highly skilled workforce is a necessity to remain competitive and adapt to changing conditions.
The Investors in People guidance throughout the process has proven positive and reflects that our training and personal development standards are on the right track.
Investors in People has benefited everyone involved at HTL from staff, managers and the board, proving that everyone within the organisation has played their part in showing how positive the experience, support, training and development helps progress the business.
Our ongoing promise is through training, HTL will work to encourage productivity and the efficiency of our business, while realising the full potential of all of our employees.
Hose Reel
- Anti corrosive stainless steel hose reel
- 210m ¼" bore twin line hose
- Locking system (can be pressurised unattended)
- 2 point integrated braking system
- Rotary coupling (able to turn while under pressure)
We also offer a budget hose reel which includes the following:
- Steel powder coated hose reel
- 210m ¼" bore twin line hose
- Pioneer couplers
- 700 bar 10,000psi working pressure
Enquire about this product
No-Flog
- Hands free
- No trapped fingers
- 2 sizes in 1
- Spark free
- No flogging hammer required
- Won't lock on
- Safe & easy to use
- Fitted in seconds
- Removed instantly
- Save time & money
- 1 7⁄16" AF - 61⁄8" AF
- Purchase as a kit or as a one-off
Enquire about this product
Tool Board
- Tool board designed around your requirements
- Designed for easy mobility
- No more searching for equipment, its all at hand
- Coloured to suit your company
Enquire about this product